Commercial Door & Entrance Installation Services Across the GTA

Full door packages for new construction, tenant fit-outs and major renovations, priced and installed as one Division 8 trade. We review the architect's hardware schedule against the drawings, catch handing and undercut conflicts before submittals, then set hollow metal or aluminum frames before boarding and hang leaves at finish stage. Hardware runs on ANSI/BHMA Grade 1 lines such as Von Duprin, LCN and Schlage, and rated stair or corridor openings get labelled NFPA 80 assemblies. Written CAD spec within 2 business days of site measure, install typically 7-14 business days from sign-off.

A general contractor on a 3-storey Liberty Village office build handed us the full Division 8 package: 22 leaves, hollow metal frames and 2 rated stair doors. Frames went in before boarding so drywall never waited, and the door scope closed with zero deficiencies at occupancy.

Swing door operators from Dorma, Besam, Stanley and Record fitted to new or existing commercial doors. Before anything is ordered we weigh the door, check hinges or pivots and measure header depth, then spec the right class: low-energy under ANSI/BHMA A156.19 for most public entrances, full-energy under A156.10 with sensors for heavy traffic. Push plate actuators, touchless wave-to-open sensors and battery backup are spelled out per door. Opening force and timing are tested before handover. Written CAD spec in 2 business days, install typically 7-14 business days from sign-off.

A King West bank facilities PM needed operators on 14 branch entrances without closing the branches. We sent the CAD scope on day 3, mounted Dorma 8616 units before opening hours, force-tested every door, and closed the install on day 18 with no callbacks since.

Complete automatic sliding entrances from Record, Besam and Horton: header, operator, sliding and sidelite panels, sensors and threshold delivered as one package. Breakout panels keep the opening compliant as an egress route, BEA or Optex sensors are laid out to ANSI/BHMA A156.10, and hold-open and speed are set for Toronto winters so vestibules do not turn into wind tunnels. Single-slide and bi-parting configurations for grocery, medical and big-box retail. Written CAD spec within 2 business days of site measure, install typically 10-14 business days from sign-off.

A Richmond Hill medical building replaced heavy manual doors with a Record bi-parting slider. Breakout panels, sensors and a heated threshold were all listed in the written spec, and the property manager noted the install matched it exactly.

New aluminum storefront systems for retail podiums, plazas and fit-outs, with framing, glazing and entrance doors from one trade. We work with Kawneer Trifab, YKK AP and Oldcastle profiles in 6063-T6 aluminum, thermally broken where the space is heated, and spec 1-inch sealed IGUs or safety glass to CAN/CGSB-12.1 at doors and sidelites. The written CAD spec lists glass makeup, anchor spacing, transom lites and threshold details before anything is ordered. Install typically 10-14 business days from sign-off once fabrication lands, with a crew of three.

A retail developer on Queen West needed three storefront bays delivered for a fixed tenant date. We took the Kawneer framing, glazing and entrances as one package, inspections passed first time, and the bays were ready for turnover on the agreed day.

Aluminum entrance doors for office lobbies, storefronts and clinics from Kawneer 350/500, YKK AP and Vistawall. Stile width is matched to traffic and hardware: narrow stile for light retail, medium or wide stile where exit devices, electric strikes or an operator need room. We confirm offset pivots or continuous geared hinges, a concealed overhead closer or surface closer, and Adams Rite or rim exit devices before ordering. An AODA operator can be added in the same scope. Clear or dark bronze anodized finishes. Install typically 10-14 business days from sign-off.

Facility ops at a Yonge and Sheppard office building replaced a failing bronze entrance with a medium stile Kawneer pair and a barrier-free operator. Push-force passed the first walkthrough and the inspector signed on the spot.

Hollow metal door and frame packages specified opening by opening: 16-gauge galvannealed steel for exterior and high-abuse doors, 18-gauge cold-rolled for interior, with polystyrene, polyurethane or steel-stiffened cores to suit insulation and impact. Frames are welded for masonry or knockdown for drywall, with hardware preps matched to the schedule and ASA strike preps where the lock needs them. We follow ANSI/SDI A250.8 and Steel Door Institute guidance on anchors and reinforcement. Written CAD spec in 2 business days, install typically 7-14 business days from sign-off.

A Concord distribution operator wanted one door standard across two warehouses. We installed galvanized hollow metal doors with push bars at both sites on one invoice, with a written warranty on every leaf and no building left unsecured overnight.