Skip to main content
Emergency Board-Up & Dispatch Active
(647) 503-6684
3 services $450-$7,000 per opening Written CAD spec in 2 biz days

Fire-Rated, Exit & Emergency Door Services in Toronto

Labelled fire-rated assemblies, exit doors with panic hardware sized to occupancy, and after-hours emergency board-up. Documented for the inspector.

15+ years in GTA commercial door installation. Division 8 scope, NFPA 80 trained, AODA barrier-free compliant, BBB accredited.

Commercial installation focus. Repair work and residential installs referred to partner network.

Labelled hollow metal fire-rated stairwell door with closer and exit device in a Toronto office building
  • WSIB + FULLY INSURED
  • CDHA MEMBER
  • NFPA 80 + AODA TRAINED
  • BBB ACCREDITED
  • 15+ years Combined install team experience
  • 2 biz days Written CAD spec reply typical
  • Hundreds of installations Across GTA commercial property types
  • AODA Barrier-free compliance specialists

What Our Fire & Life Safety Services Cover

Fire and life safety openings are the doors an inspector actually checks. Stair doors, corridor doors, electrical and service rooms, and exit doors all have rules about labels, gaps, closers, latching and egress hardware. When one of them fails, it shows up as a deficiency order with a deadline.

This family covers three services. Fire-rated door installation handles labelled 60 and 90-minute door, frame and hardware assemblies to NFPA 80 and CAN/ULC-S104. Fire exit door replacement covers whole exit door and panic hardware packages that meet OBC and Ontario Fire Code egress. Emergency board-up is our only fast-response service: openings secured the same day after a break-in or damage, followed by a written install plan.

Our crew is NFPA 80 trained. Every rated opening gets its label, clearances and latching recorded with photos, so the fire inspector and the property file both have proof. When an order lists a mix of problems, we separate doors that can be corrected from assemblies that must be replaced, so you only pay for what the order actually requires.

Exit work is phased. At least one exit per floor stays open throughout, and new doors are hung the same day the old ones come out. The written scope lists hardware and egress details ahead of the sign-off visit.

Fire label on a hollow metal door edge with a gap gauge during an NFPA 80 check

Standards we build to

NFPA 80
Labels, clearances, closers and positive latching checked and recorded on every rated opening.
CAN/ULC-S104
Assemblies tested and labelled to the Canadian fire test standard for door assemblies.
OBC Part 3
Fire separation ratings read from drawings or existing labels and matched in the spec.
Ontario Fire Code
Exit hardware sized to occupant load, exits kept open during phased work.

Which fire and life safety service do you need?

If your situation isYou likely needService
Stair, corridor or service room doors need rated assemblies 60 or 90-minute labelled assembly Fire-Rated Door Installation $2,500-$7,000
Exit door and panic bar are worn or failing Whole exit door + device replacement Fire Exit / Panic Bar Door Replacement $2,800-$6,500
Break-in, vehicle impact or smashed storefront tonight Same-day board-up + install plan Commercial Emergency Board-Up Service $450-$1,500 + install quote

Fire & Life Safety Door Services

Fire & Life Safety 3 services

Labelled fire-rated assemblies installed to NFPA 80 and tested to CAN/ULC-S104 and UL 10C positive pressure: rated door, labelled frame, rated closer, positive latching and any rated ceramic glass or intumescent gasket. Clearances are held to the 1/8-inch tolerance at the head and jambs, steel astragals go on rated pairs, and every opening is photographed with its labels for the Ontario Fire Code inspector. We also clear fire inspection deficiency orders, separating doors that can be corrected from assemblies that must be replaced under OBC Part 3. Written CAD spec within 2 business days.

Includes: Labelled doors and frames | Rated closers and latching | Gap and latch check per opening | Photo and label records

Timeline: 10-14 biz days spec-to-install; crew of 2-3

A Richmond Hill condo board had twelve stair and corridor doors on a fire inspection order. We separated correctable doors from replacements, installed 90-minute labelled assemblies on the stair shafts, documented every label, and the order was closed at re-inspection.

Request fire door assessment

Exit door and exit device replaced together so the opening meets OBC egress and the Ontario Fire Code. Panic hardware is sized to the occupant load, rated doors get fire exit hardware such as Von Duprin 98/99 rim or surface vertical rod devices, and exit signage and clear widths are checked. Work is phased with same-day hangs so at least one exit per floor is open at all times, which matters in schools, offices and restaurants that cannot close. The written scope lists hardware and egress details ahead of the inspection sign-off visit. Install typically 7-14 business days from sign-off.

Includes: Door + exit device package | Fire exit hardware on rated doors | Same-day hang, phased | Scope ready for sign-off

Timeline: 7-14 biz days spec-to-install; crew of 2

A private school in Agincourt needed four exit doors replaced during March break while staff were still on site. We phased the work so one exit per floor was always open, and fire department sign-off was quick because the scope already listed every device.

Get exit door quote

Commercial Emergency Board-Up Service

$450-$1,500 + install quote

Our only fast-response service. After a break-in, smash-and-grab, vehicle impact or storm damage, call the same line after hours and a crew secures the opening the same day with bolted and braced 3/4-inch CDX plywood, carriage bolts through the frame and tension bracing, creating a temporary weather-tight enclosure. Damage is photographed for your insurer, and within 2 business days you get a written install plan and CAD quote for the permanent door or laminated replacement glass. We direct-bill major commercial property insurance claims.

Includes: After-hours, same line | Bolted and braced board-up | Damage photos for insurer | Written install plan follows

Timeline: Same-day temp-secure; install plan within 2 biz days; crew of 2

A Queen West retailer called after a 2am break-in. The storefront was boarded overnight, damage photos went to the insurer the next morning, and a written install plan for the new door arrived within two business days.

Request board-up now

From Site Measure to Written Warranty

  1. 1

    Free site measure

    Every opening measured, frames and hardware checked ($0 first visit).

  2. 2

    Written CAD spec

    Spec and price range per opening within 2 business days. No verbal estimates.

  3. 3

    Sign-off, then order

    Nothing is ordered until you approve the spec in writing.

  4. 4

    Install

    Typically 7-14 business days from sign-off, scheduled around your occupants.

  5. 5

    Test and hand over

    Operation checked, documented and covered by a written warranty on every leaf.

Fire & Life Safety Installs Across the GTA

  • Fire-Rated Doors before in Liberty Village Toronto install
    Fire-Rated Doors after in Liberty Village Toronto install
    Before After

    Rated stair door in new office build

    Rated stair door, 3-storey office, Liberty Village

  • Fire Exit Doors before in Agincourt Toronto install
    Fire Exit Doors after in Agincourt Toronto install
    Before After

    School exit doors with panic hardware

    Exit door + panic hardware, private school, Agincourt

    Scarborough Fire Exit Doors
  • Fire-Rated Doors before in Cooksville Toronto install
    Fire-Rated Doors after in Cooksville Toronto install
    Before After

    School corridor rated doors

    60-minute rated assembly, school corridor, Cooksville

    Mississauga Fire-Rated Doors
  • Fire-Rated Doors before in Yonge and Major Mackenzie Toronto install
    Fire-Rated Doors after in Yonge and Major Mackenzie Toronto install
    Before After

    Condo stair door order cleared

    90-minute stair door, condo, Yonge and Major Mackenzie

    Richmond Hill Fire-Rated Doors
Full before and after gallery

What Clients Report About Our Fire & Life Safety Work

"Rear exit door and panic bar replaced in one afternoon."
Victor L. Restaurant owner | Kerr Village, Oakville Fire Exit Doors
"Two 60-minute rated doors installed at our electrical rooms. Labels, gaps and latching were checked and documented before the crew left site."
Brian O. Office PM | Airport Corporate Centre, Mississauga Fire-Rated Doors
"Our condo received a fire inspection order listing twelve stairwell and corridor doors with missing labels, failed closers and gaps outside tolerance. The team reviewed the order, checked each opening against NFPA 80, and sent a written scope separating doors that could be corrected from assemblies that had to be replaced. They installed new 90-minute labelled doors and frames on the stair shafts and new closers and latching hardware elsewhere. Every opening was documented with photos and label details for re-inspection, and the order was closed."
Andrew P. Condo property manager | Yonge and Major Mackenzie, Richmond Hill Fire-Rated Doors

Representative client feedback; renter replaces with verified reviews at lease.

Fire & Life Safety Door Services: FAQs

Can you help clear a fire inspection deficiency order?

Yes. We review the order against NFPA 80, separate correctable doors from replacements, and document every opening with photos and label details for re-inspection.

What fire ratings do you install?

Mostly 45, 60 and 90-minute labelled door and frame assemblies for corridors, stairwells and service rooms, with rated closers, latching and glazing to match.

Will our exits stay open during replacement?

Yes. Exit work is phased so at least one exit per floor is open the whole time, and new doors are hung the same day.

Is emergency board-up available after hours?

Yes. After-hours calls go to the same line, (647) 503-6684. Openings are secured the same day and a written install plan follows within 2 business days.

What does a fire-rated door assembly cost?

Most labelled assemblies run $2,500-$7,000 each depending on rating, size, glazing and hardware. Technician confirms specs and price at your free on-site measure.

Still have a scope question? Our spec desk answers the phone.

(647) 503-6684
Written CAD spec within 2 business days. Site measure $0 first visit.

Plan Your Fire & Life Safety Scope

Free site measure ($0 first visit). Written spec and price range within 2 business days. Install typically 7-14 business days from sign-off.

  • No verbal estimates
  • Written warranty on every leaf
  • WSIB + fully insured
  • Insurance direct-billing

Mon-Fri 8:00 AM - 6:00 PM. Emergency board-up after hours via the same line.

Request a Written CAD Quote

Free site measure ($0 first visit). Written spec and price range within 2 business days.

Prefer to talk? (647) 503-6684

(647) 503-6684 Get CAD Quote