Commercial Door Frame Replacement
$1,400-$4,200Replacement of bent, rusted or loose hollow metal and aluminum frames, using retrofit or full frames to suit the wall.
Get frame assessmentMedical offices clustered along Davis Drive near Southlake and retail plazas around Upper Canada Mall drive barrier-free entrance work, frame replacement in drywall partitions and closer upgrades for northern winter exposure.
By the Commercial Door Toronto Install Crew. Commercial installation focus. Repair work and residential installs referred to partner network.
Newmarket's commercial activity centres on Davis Drive, with medical offices clustered near Southlake Regional Health Centre, plazas around Upper Canada Mall, and light industry along Harry Walker Parkway.
Medical buildings here need suite doors patients can actually use. We do frame replacement in drywall partitions and fit accessible operators on busy suites.
Being further north, plaza entrances take more winter wind than downtown doors, so heavy-duty closers are sized for it. Site days are planned to group work and keep travel cost down.
Every job runs the way all our commercial door installation across Toronto and the GTA does: a free site measure, then a written CAD spec with a price range per opening within 2 business days.
Recent installs in the area
What you see: Suite doors bind in twisted frames, close too fast for patients with walkers, and leave staff propping them open all day.
Why it happens here: Southlake's roughly 500-bed campus at 596 Davis Drive anchors a cluster of medical buildings, including the Medical Arts Building across the street, so suite doors see constant patient traffic.
What we do: We do commercial door frame replacement in the drywall partition with minimal finish damage, and add accessible operators where patients need them.
Frame depth, hardware prep or rating gets checked after parts arrive, and the price moves. We measure first and put every opening in a written CAD spec before anything is ordered.
Non-rated hardware on a rated door, push buttons inside the swing, closers set too hard. Each one is a work order with a deadline. Our specs follow NFPA 80, OBC Part 3 and the AODA.
A half-finished swap leaves a building open. Our crews schedule around tenants and shifts and close every opening before they leave site.
A strike that misses the frame prep or an exit device on a stile too narrow to hold it. We list the hardware set per opening, so it fits the first time.
These are the scopes local clients book most often. Every price is a range; a technician confirms specs and price at your free on-site measure.
Replacement of bent, rusted or loose hollow metal and aluminum frames, using retrofit or full frames to suit the wall.
Get frame assessmentPush-button barrier-free operators retrofitted on public entrances, with actuator placement and opening force tested for review.
Request AODA site visitSurface and concealed closers sized to door weight and exposure, with arms and speeds set for Toronto winters.
Get closer quoteLike-for-like swaps of worn commercial doors, scheduled around occupied buildings, with frame reuse where the frame is sound.
Get replacement quoteTell us about the building, the openings and your timing.
We measure every opening and check frames, hardware and ratings ($0 first visit).
Spec and price range per opening within 2 business days. Nothing is ordered until you sign.
Install typically 7-14 business days from sign-off, tested, documented and warrantied.
No risk to start: the site measure is free, the spec is in writing within 2 business days, and nothing is ordered until you sign it. Every leaf carries a written warranty.
Drag any card to compare. Where we do not have four local installs on file yet, the nearest cities fill in.
Medical office drywall frame
Knockdown frame, medical office, Davis Drive
Campus entrance operators
Swing operators, corporate campus, Hwy 404 corridor
Clinic pulls and mortise locks
Rockwood pulls + mortise locks, clinic, Markham Village
Medical building bi-parting slider
Record bi-parting slider, medical building, Yonge and Hwy 7
"Two Dorma closers on our plaza entrances. They sized the arms for the door weight and set the closing speed for winter wind."
"Frame replaced in the drywall partition with minimal finish damage."
"Our public entrance needed an AODA operator with push buttons on both sides. They measured approach clearances, mounted the actuators at the right heights, and tested opening force before handover. The accessibility review passed on the first visit, and the operator has worked reliably through a full winter of heavy patient traffic."
Representative client feedback; renter replaces with verified reviews at lease.
Davis Drive and Southlake area: medical and professional offices with drywall partitions, suite doors, frames and barrier-free entrances.
Upper Canada Mall area and Yonge and Mulock: retail plazas with storefront entrances that need closers sized for northern wind exposure.
Harry Walker Parkway and Main Street: light industrial units with steel man-doors, and main-street shops with storefront doors.
Davis Drive sites are reached up Highway 404 or Yonge Street. Site measures and installs are grouped into planned days so travel time does not inflate the price, and medical office work is scheduled around patient hours.
Permits and inspections run through Town of Newmarket Building Services, with fire services provided by Central York Fire Services. Medical entrances are spec'd to the AODA Design of Public Spaces standards and OBC 3.8 barrier-free rules.
Northern exposure means colder, windier winters than downtown Toronto. Plaza closers get heavier spring power and all-weather fluid, and exterior steel doors get insulated cores and thermal thresholds.
Postal codes we cover: L3X, L3Y
Crews reach Davis Drive and Harry Walker Parkway via Highway 404, and Upper Canada Mall via Yonge Street.
Yes. Frames in drywall partitions are cut out and replaced with minimal finish damage. A recent Davis Drive medical office had its frame replaced in a single day.
Yes. A recent plaza job installed Dorma closers sized for winter wind, with latch speed set so doors close fully on the coldest days.
Closer installs usually run $450-$1,200 per door depending on size, arm type and hold-open needs.
Yes. Suites near the Southlake campus see constant patient traffic, so we fit accessible operators with push buttons on both sides and test opening force before handover.
Permits go through Town of Newmarket Building Services. On fit-outs the landlord or GC usually holds the permit, and we provide submittals and closeout documents.
Still have a scope question? Our spec desk answers the phone.
(647) 503-6684Book a free site measure. You get a written CAD spec with a price range per opening within 2 business days.
Mon-Fri 8:00 AM - 6:00 PM. Emergency board-up after hours via the same line.
Request received
Thanks. Our spec desk will reply with a written CAD quote within 2 business days.
Request a Written CAD Quote
Free site measure ($0 first visit). Written spec and price range within 2 business days.