Storefront Door Replacement
$3,500-$9,500Full-lite aluminum leaf swaps in existing storefronts, with pivot and hinge prep checked and hardware transferred.
See storefront door optionsGolden Mile commercial and light-industrial strips are being revitalized, driving storefront door swaps, security-focused steel door replacements and school exit door upgrades across older plazas.
By the Commercial Door Toronto Install Crew. Commercial installation focus. Repair work and residential installs referred to partner network.
Scarborough's Golden Mile and the Eglinton East corridor mix aging retail plazas with light-industrial strips that the 2020 Secondary Plan has lined up for redevelopment. Further north, Agincourt, Wexford and Malvern add schools, community buildings and more plaza retail.
Much of the door stock is older aluminum storefront and prime-coat steel service doors. We do full-lite storefront door swaps in a morning and rusted rear door replacement with matched hardware prep.
Schools and community buildings get exit door and panic hardware upgrades phased over breaks, so every exit stays usable.
Every job runs the way all our commercial door installation across Toronto and the GTA does: a free site measure, then a written CAD spec with a price range per opening within 2 business days.
Recent installs in the area
What you see: Storefront doors stop latching and rear service doors rust through, but the owner does not want to pour money into a building slated for redevelopment.
Why it happens here: The Golden Mile Secondary Plan, adopted in 2020, sets up about 113 hectares along Eglinton East for towers of up to 35 storeys, so many plazas are in an in-between stretch of several years.
What we do: We spec storefront door replacement and steel service door swaps sized to the remaining tenancy, secure and code-compliant without overbuilding.
Frame depth, hardware prep or rating gets checked after parts arrive, and the price moves. We measure first and put every opening in a written CAD spec before anything is ordered.
Non-rated hardware on a rated door, push buttons inside the swing, closers set too hard. Each one is a work order with a deadline. Our specs follow NFPA 80, OBC Part 3 and the AODA.
A half-finished swap leaves a building open. Our crews schedule around tenants and shifts and close every opening before they leave site.
A strike that misses the frame prep or an exit device on a stile too narrow to hold it. We list the hardware set per opening, so it fits the first time.
These are the scopes local clients book most often. Every price is a range; a technician confirms specs and price at your free on-site measure.
Full-lite aluminum leaf swaps in existing storefronts, with pivot and hinge prep checked and hardware transferred.
See storefront door optionsDirect swaps of rusted or sagging hollow metal doors into existing frames, with new sweeps, thresholds and weatherstrip.
Request steel swap visitWhole exit door replacements with panic or fire exit hardware, phased so every floor keeps a working exit.
Get exit door quoteLike-for-like swaps of worn commercial doors, scheduled around occupied buildings, with frame reuse where the frame is sound.
Get replacement quoteTell us about the building, the openings and your timing.
We measure every opening and check frames, hardware and ratings ($0 first visit).
Spec and price range per opening within 2 business days. Nothing is ordered until you sign.
Install typically 7-14 business days from sign-off, tested, documented and warrantied.
No risk to start: the site measure is free, the spec is in writing within 2 business days, and nothing is ordered until you sign it. Every leaf carries a written warranty.
Drag any card to compare. Where we do not have four local installs on file yet, the nearest cities fill in.
Plaza storefront door swap
Full-lite storefront door, retail tenant, Golden Mile
School exit doors with panic hardware
Exit door + panic hardware, private school, Agincourt
Plaza rear service doors
Prime-coat steel service door, retail plaza, Wexford
Aluminum entrance with AODA operator
Aluminum entrance + AODA operator, office, Yonge and Sheppard
"We replaced four exit doors at our private school during March break. Each door came with new panic hardware sized for the occupancy, and the crew phased the work so at least one exit on every floor stayed open the whole time. Fire department sign-off was quick because the written scope already listed the hardware and egress details."
"Full-lite storefront door swapped in a morning. Clean, careful work."
"Rear service doors on our plaza were rusted through. They replaced both with prime-coat hollow metal and matched the existing hardware prep."
Representative client feedback; renter replaces with verified reviews at lease.
Golden Mile and Eglinton East: retail plazas and light-industrial strips with aluminum storefront doors, rear steel service doors and security-focused replacements.
Agincourt and Malvern: schools, community centres and places of worship where exit doors, panic hardware and barrier-free operators are common scopes.
Wexford, the Town Centre area and Morningside: plazas, offices and industrial units with steel doors, frames and closers.
East-end sites are reached across the 401 or along Eglinton East and the DVP. Plaza storefront swaps are scheduled before opening hours; school exit work is scheduled for March break, summer or weekends with one exit per floor always open.
This district is part of the City of Toronto, so permits run through Toronto Building and fire inspections through Toronto Fire Services. Exit doors are spec'd to OBC egress and the Ontario Fire Code, with scopes written for quick sign-off.
Salt and slush rust prime-coat rear doors from the bottom rail up. Replacements move to galvanized or prime-coat with new sweeps depending on exposure. School exit work is planned months ahead to fit March break.
Postal codes we cover: M1L, M1P, M1R, M1S, M1B, M1V
Crews reach the Golden Mile via Eglinton Avenue East, and Agincourt and Malvern via Highway 401.
Yes. A recent Golden Mile retail tenant had a full-lite storefront door swapped in a morning, and the store opened at noon.
Usually, yes, if the spec fits the remaining tenancy. The Golden Mile plan runs over many years, so we size replacements to stay secure and code-compliant without overbuilding.
Yes. A recent Wexford plaza job replaced rusted rear service doors with galvanized steel and matched hardware prep, so existing locks moved over.
Yes. A recent Agincourt private school had 4 exit doors replaced over March break, phased so exits stayed usable.
Exit door and panic hardware replacement usually runs $2,800-$6,500 per exit depending on door, frame and device. Rated exits cost more than unrated rear doors.
Toronto Fire Services inspects, and permits go through Toronto Building for the Scarborough district. We supply label photos and written scopes.
Still have a scope question? Our spec desk answers the phone.
(647) 503-6684Also covered from these crews: Pickering, Ajax, Whitby, Oshawa.
All service areasBook a free site measure. You get a written CAD spec with a price range per opening within 2 business days.
Mon-Fri 8:00 AM - 6:00 PM. Emergency board-up after hours via the same line.
Request received
Thanks. Our spec desk will reply with a written CAD quote within 2 business days.
Request a Written CAD Quote
Free site measure ($0 first visit). Written spec and price range within 2 business days.